Technical guides
How to Install a Hose Assembly So It Lasts
Most hose failures are installation failures: too short, bent below the minimum radius, twisted, or rubbing on a surface. Six rules that prevent them.
News
Technical notes and factory news
Hose selection, crimping, installation and maintenance notes written from the production floor at Jiangxi Belong Tech.
All stories
4 stories
Read
Technical guides
How to Measure Hose Assembly Length Correctly
Hose assembly length is measured differently depending on the fitting: straight, elbow, flange or O-ring face seal. Measure the wrong way and the assembly arrives too short.
Technical guides
How to Crimp a Hose Assembly Without Relying on Luck
Cut-off factor, blade choice, cleanliness, insertion depth and crimp tolerance: the five steps that decide whether an assembly holds its rated pressure.
Technical guides
How to Choose the Right Hose: Remember S.T.A.M.P.S.
Six details decide whether a hose works: size, temperature, application, media, pressure and standard. Ask for them in this order and the quotation matches the job.
Products
Hose that matches these notes
The products referenced in the articles, with the standard and construction of each.
